Allen & Heath Xone:32 Mixer

Just two years after the conception of the original xone, these mixers can be found producing the pulse in some of the coolest clubs while also earning the respect of the best-known dj's on the planet. The xones benefit from the Allen and Heath heritage of over 30 years experience in the professional live and recorded sound industry. As an example the Allen and Heath eq... almost legendary in pro audio circles, translates dynamically to the xone along with massive headroom, vca technology and lots of innovative user features. All of the xones include controls like the voltage control filter allowing you to get fully creative with your mix. The vca cross fader gives the cleanest sound possible and the "drs" digital recall system on this mixer allows recall of filter settings at the touch of a button. This is a superb quality 3 channel mixer with 3 band eq on each channel, 60mm vca faders, vca cross fader with curve controls and reverse filter x-fader controlling target frequency for the high, low and band pass filters. The xone also features resonance control and LFO oscillator set up with a tap tempo button and features a 2 x speed button for instantly doubling the time of the oscillation. This mixer is creating more and more interest and we highly recommend a visit to a showroom carrying Allen and Heath to experience this mixer in the flesh. Desktop: 258mm / 10.2" 360mm / 14.2" 90mm / 3.5" 4.5kg / 9.9lb

Technical Specifications:

• OdBu = 0.775 Volts rms +4dBu = 1.23V rms
• OdBu = 1 Volt rms -10dBV = 316mV rms

Maximum output level:

• MAIN OUT +24dBu into >2k ohm load
• AUX/BOOTH +20dBu into >2k ohm load
• REC OUT +15dBu into >10K ohm load

Internal headroom:

• Channels +21dB
• Mix to output +23dB

Peak indicators:

• Turn on 12dB before clipping

Meters:

• MAIN / MONITOR Peak hold 12 LED 3 colour
• CHANNEL Peak reading 4 LED 3 colour

Frequency response:

• 10Hz to 40kHz +0/-1dB
• Distortion THD+noise measured at +10dBu 1kHz < 0.002%
• Crosstalk channel shutoff measured at 1kHz < 90dB
• Noise measured rms 22Hz to 22kHz MIC EIN -126dB referred to 150 ohm source
• Residual output noise: -100dBu
• Mix noise: -87dBu (-87dB S/N)
• Power Supply Internal switch mode power unit with auto sensing mains input.
• MAINS IN socket IEC 3 pin
• Power lead Country dependent with moulded mains plug supplied
• AC mains 100 to 240V AC @ 50/60Hz
• Consumption 30W max
• Mains fuse rating 100-240V AC T500mA 20mm